Panasonic DMC-LS75 Shooting with the Intelligent ISO mode, Press e/r to select ISO Limit

Advanced-Shooting

Shooting with the Intelligent ISO mode

The camera detects movements of the subject near the center of the frame and sets the optimum ISO sensitivity and shutter speed according to the movements and brightness.

1	Press [MENU/SET].
2	Press e/r to select [ISO LIMIT]
	and then press q.
	REC		1/3
	W.BALANCE		AWB
	MAXISO ISO LIMIT		400
	ASPECT RATIO		8004:3
	PICT.SIZE		1250
	QUALITY
	SELECT	SET MENU
3	Press e/r to select the menu
	item and then press [MENU/SET].

Item	Content
400	The camera raises the ISO
800	sensitivity up to the level you have
1250	set to match the movement and
	brightness of the subject.

•The higher you raise the ISO sensitivity, the less chance there is of the subject blurring, but picture noise will increase.

•When shooting a moving subject indoors, you can reduce blur by raising ISO sensitivity and increasing the shutter speed.

F2.8 ISO

1/125 ISO800

•When taking pictures of a motionless subject, you can reduce noise by setting ISO sensitivity at a low level.

F2.8 ISO

1/30 ISO200

•When you press the shutter button

halfway, [ISO] appears. When you press the shutter button fully, the shutter speed and the ISO sensitivity appear for a while.

F2.8 ISO

•Focus range is 5 cm (0.16 feet) (Wide)/30 cm (0.98 feet) (Tele) to Z.

•ISO sensitivity can be raised to a maximum of [ISO640] when using the flash (when ISO Limit is set to anything other than [ISO400]).

•Refer to P42 for the available flash range.

•Brightness or the subject’s moving speed may cause pictures to blur.

•Movement detection may not be possible in the following cases.

–When the moving subject is too small

–When the moving subject is on the edge of the frame

–In case the subject began to move the moment you pressed the shutter button fully

•To avoid picture noises, we recommend reducing the [ISO LIMIT] or setting [COL. MODE] to [NATURAL] (P66).

•You cannot use the digital zoom.

45

VQT1C63