Panasonic DMC-LS70 Age display setting, Birthday setting, Select Birthday SET. and press

Advanced-Shooting

Press [ MENUSET ] to display the [SCENE MODE] menu and select a scene mode. (P47)

Sunset mode

Use to take pictures of the sunset. Sunset color can be reproduced vividly.

•The flash setting is fixed to Forced OFF [v].

•The setting on the AF assist lamp is disabled.

•ISO sensitivity is fixed to [ISO100].

•You cannot change the white balance setting.

1 Baby mode 1

2 Baby mode 2

Adjusts the exposure and tone to bring out the healthy color of your baby’s skin. The flash will be weaker than normal if you choose to use it.

You can set the birthdays of two babies by using [BABY1] and [BABY2]. You can display the set age when playing back the pictures and imprint the age on the recorded pictures with [DATE STAMP] (P75).

•You can also use the [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] software on the included CD-ROM to print your baby’s age. (For details, refer to the separate operating instructions for PC connection.)

■Age display setting

• To show age, first enter the birthday, select [WITH AGE], and press [MENU/ SET].

1 BABY1

WITH AGE

WITHOUT AGE

BIRTHDAY SET.

CANCEL SELECT SET MENU

■Birthday setting

1Select [BIRTHDAY SET.] and press

[MENU/SET].

2[PLEASE SET THE BIRTHDAY OF THE BABY] appears. Select year/month/day with w/q and change the date with e/r.

3Press [MENU/SET] to exit.

•Focus range is 5 cm (0.16 feet) (Wide)/30 cm (0.98 feet) (Tele) to Z.

•Sensitivity will be the same as when you have set ISO LIMIT in Intelligent ISO mode [ ] (P45) to [ISO400].

•After turning on the camera in [BABY1]/ [BABY2] in scene mode, the age, current date, and time appear for about 5 seconds at the bottom of the screen.

•Actual age displays depend on the [LANGUAGE] setting.

•Check the clock and birthday settings if the age shown is incorrect.

•Note that if you select [WITHOUT AGE], age information is not recorded. The information will not appear even if you select [WITH AGE] after taking pictures.

•To reset the birthday setting, use [RESET] in the [SETUP] menu. (P23)

•The digital zoom is fixed to [OFF].

Pet mode

Suitable for taking pictures of your pet. Keep a record of your pet’s development by adding the date. You can display the set age when playing back the pictures and imprint the age on the recorded pictures with [DATE STAMP] (P75).

•Displays and settings are the same as for the baby modes. For details on how to set age and birthday, see [BABY1]/ [BABY2].

•You can also use the [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] software on the included CD-ROM to print the pet’s age. (For details, refer to the separate operating instructions for PC connection.)

50

VQT1C63