Panasonic DMC-LS60, DMC-LS75, DMC-LS70 operating instructions Playing Back Pictures with a TV Screen

Connecting to other equipment

Playing Back Pictures with a TV Screen

■Playing back pictures with the supplied cable

•Set the [TV ASPECT]. (P23)

•Turn the camera and the TV off.

V.OUT

DIGITAL

DC IN

3V B

A

1Connect the video cable A (supplied) to the [V. OUT] socket

of the camera.

•Connect the video cable with the [c] mark facing the [q] mark on the [V. OUT] socket.

•Hold B and then insert or pull the video cable straight.

2Connect the video cable to the video input socket of the TV.

3Turn the TV on and select external input.

4Turn the camera on.

•Do not use any other Video cables except the supplied one.

•The top and bottom or left and right of the picture may be cut off slightly when it is displayed due to the characteristics of the TV.

•Depending on the screen mode setting of the TV when you connect the camera to a wide-screen TV or a high-definition TV, the picture may be stretched horizontally or vertically and the top and bottom and or left and right of the picture may be cut off when it is displayed. In this case, change the screen mode setting.

•Read the TV operating instructions too.

•Pictures might be slightly blurred if you show them vertically on a television.

•You can view pictures on TVs in other countries (regions) which use the NTSC or PAL system when you set [VIDEO OUT] in the [SETUP] menu. Even if you set [VIDEO OUT] to [PAL], the output signal will still be NTSC in the recording mode.

■Playback pictures on TV with SD Memory Card slot

You can put your SD Memory Card in a television with an SD Memory Card slot to show still images.

•Depending on the television, some pictures may not take up the whole screen.

•You cannot play motion pictures. To play back motion pictures, connect the camera to the TV with the video cable (supplied).

•You may be unable to play MultiMedia Cards.

91

VQT1C63