Panasonic DMC-LS70, DMC-LS75, DMC-LS60 operating instructions Connecting to other equipment

Connecting to other equipment

•Do not use any other USB connection cables except the supplied one.

•While [ACCESS] is being displayed, do not disconnect the USB connection cable.

•Data transmission takes time when a card contains a large number of pictures.

•Motion image files in the built-in memory or on a card in this unit may not play properly on a computer, so upload them to your computer for playback.

•If the remaining battery power is exhausted during communication, the recorded data may be damaged. When you connect the camera to the PC, use a battery with sufficient battery power (P24) or the AC adaptor (DMW-AC6; optional).

•If the remaining battery power becomes low while the camera and the PC are communicating, the status indicator blinks and the alarm beeps. In this case, stop the communication at once on the PC.

•When connecting the camera to a Windows 2000 OS PC with the USB connection cable, do not replace the card while the camera and the PC are connected. The information on the card may be damaged. Before changing cards, make sure you do the necessary steps to safely remove hardware (double-click the icon in the task bar in Windows).

•Pictures edited or rotated with a PC may be displayed in black in playback mode (P34), multi playback (P67) and calendar playback (P68).

•Refer to the operating instructions of the PC, too.

•If a card is not inserted when the camera is connected to the PC, you can edit or access the picture data on the built-in memory. If a card is inserted, you can edit or access the picture data on it.

86

•You cannot switch between the built-in memory and the card while the camera is connected to the PC. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the PC again.

•When you change the mode dial to print

mode [ ] with the camera connected to the PC, [PLEASE RE-CONNECT THE PRINTER.] appears on the camera’s LCD monitor. Before reconnecting the camera to a printer, change the mode

from [ ] to another one and make sure that data transmission is not in progress. ([ACCESS] appears on the camera’s LCD monitor while data transmission is in progress.)

VQT1C63