Pioneer DEH-P8950BT operation manual Switching the Ever Scroll, Activating the BT Audio source

Black plate (46,1)

Section

02Operating this unit

Switching the Ever Scroll

When Ever Scroll is set to ON, text information recorded on CD or iPod scrolls continuously in the display. Set to OFF if you prefer the infor- mation to scroll just once.

1Use MULTI-CONTROL to select Ever-scroll.

2Press MULTI-CONTROL to turn the Ever

Scroll on.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

This setting is set to on by default. If you do not use BT Audio, you can turn it off.

1Use MULTI-CONTROL to select

BT AUDIO.

2Press MULTI-CONTROL to turn the BT Audio source on.

1Use MULTI-CONTROL to select Pin code input.

2Push MULTI-CONTROL up or down to

select a number.

# You can also press 0 to 9 on the remote con- trol to select a number.

3Push MULTI-CONTROL left or right to move the cursor to the previous or next po- sition.

4After inputting PIN code (up to 16 di- gits), press MULTI-CONTROL to store in this

unit.

# Pushing MULTI-CONTROL right in the confir- mation display returns you to the PIN code input

display, and you can change the PIN code.

# If an invalid character has been entered, sub-

sequent characters are not displayed.

# If an invalid character has been entered in the beginning, PIN code cannot be stored in mem- ory.

Editing device name

#To turn the BT Audio source off, press MULTI-CONTROL again.

#If you turn the BT AUDIO in the initial settings off, the history of the most recently connected Bluetooth audio stored in this unit is cleared.

Entering PIN code for Bluetooth wireless connection

To connect your cellular phone to this unit via Bluetooth wireless technology, you need to enter PIN code on your phone to verify the connection. The default code is 0000, but you can change this in this function.

!With some Bluetooth audio players, you may be required to enter to this unit in ad- vance PIN code of your Bluetooth audio player, in order to set this unit ready for a connection from your Bluetooth audio player.

You can edit the device name.

The device name is set to Pioneer BT unit as default.

1Use MULTI-CONTROL to select Edit device name.

2Press DISPLAY to select the desired character type.

Press DISPLAY repeatedly to switch between the following character types:

Alphabet (upper case)—Alphabet (lower case)

—Numbers and symbols

3Push MULTI-CONTROL up or down to select a letter of the alphabet.

4Push MULTI-CONTROL left or right to move the cursor to the previous or next character position.

46 En

<CRD4206-A/N>46