Black plate (36,1)

Section

02Operating this unit

4 To end the call, press PHONE.

The estimated call time appears in the display (this may differ slightly from the actual call time).

Assigning preset numbers

Important

To perform this operation, be sure to park your ve- hicle and apply the parking brake.

Numbers that you dial frequently can be as- signed to presets for quick recall.

1Select a desired phone number from the Phone Book or the Call History.

To select a desired phone number from the Phone Book or the Call History, see the in- structions explained in previous pages.

2Press one of 0 to 9 on the remote con- trol and hold until the beep sounds.

The selected phone number has been stored in memory. The next time you press the same preset button, the phone number is recalled from memory.

Making a call by entering phone number

Important

To perform this operation, be sure to park your ve- hicle and apply the parking brake.

1Use MULTI-CONTROL to select

Number dial in the function menu.

# You can also press DIRECT on the remote con- trol to enter in this menu from the standby dis- play.

3Push MULTI-CONTROL left or right to move the cursor to the previous or next po-

sition.

# Up to 24 digits can be entered.

4When you completed entering the number, press MULTI-CONTROL.

5Press MULTI-CONTROL again to make a call.

6To end the call, press PHONE.

Clearing memory

You can clear memory of each item; Phone Book, dialled/received/missed call history list and preset phone number.

1Use MULTI-CONTROL to select Clear memory in the function menu.

2Push MULTI-CONTROL up or down to select an item.

Each time MULTI-CONTROL is pushed up or down, the items are switched in the following order:

Phone book (phone book)—Missed calls (missed call history)—Dialled calls (dialled call history)—Received calls (received call his- tory)—Dial preset (preset phone numbers)—

All clear (delete all memory)

# If you want to clear all the Phone Book, dialled/received/missed call history list and pre- set phone number, select All clear.

3Push MULTI-CONTROL right to deter- mine the item that you want to delete from this unit.

Clear memory YES is displayed. Clearing

memory is now on standby.

# If you do not want to clear memory that you

2Push MULTI-CONTROL up or down to

select a number.

# You can also input numbers by pressing 0 to 9 on the remote control.

have selected, push MULTI-CONTROL left. The display reverts.

4Press MULTI-CONTROL to clear the memory.

Cleared is displayed and data on the selected item is cleared from this unit’s memory.

36 En

<CRD4206-A/N>36

Page 36
Image 36
Pioneer DEH-P8950BT Assigning preset numbers, Making a call by entering phone number, Clearing memory, CRD4206-A/N36