Pioneer DEH-P8950BT operation manual Operating this unit Bluetooth Telephone

Black plate (25,1)

Section

Operating this unit

Bluetooth Telephone					Shows the registration number of the cellular
Basic Operations					phone.
				4	Battery strength indicator
If your cellular phone features Bluetooth wire-					Shows the battery strength of cellular phone.
less technology, you can connect to this unit					! Battery strength indicator may differ
for hands-free, wireless calls, even while driving.					from the actual battery strength.
					! If the battery strength is not available,
	Important				nothing is displayed in the battery
! Since this unit is on standby to connect with					strength indicator area.
				5	Missed call notice indication
your cellular phones via Bluetooth wireless
					Shows when an incoming call has been re-
technology, using this unit without running
					ceived and not answered.
the engine can result in battery drainage.
				6	Automatic answering/Automatic rejecting in-
! Advanced operations that require your atten-
					dicator
tion such as dialing numbers on the monitor,
					Shows AUTO when the automatic answering
using phone book, etc., are prohibited while
					function is on (for more details, refer to Setting
you are driving. When you need to use these
					the automatic answering on page 37).
advanced operations, stop your vehicle in a
					Shows REFUSE when the automatic rejecting
safe place and operate.
					function is on (for more details, refer to Setting
! When phone is selected as a source, no audio
					the automatic rejecting on page 37).
adjustments, except balance adjustment, are
				7	Clock display
possible. The front/rear speaker balance is set
					Shows the time (if connected with a phone).
to F 15 by default for the phone source.
				8	Calendar display
These are the basic operations to use hands-					Shows the day, month and year (if connected
					with a phone).
free phoning via Bluetooth wireless technol-
ogy. More advanced hands-free phoning op-					Notes
erations are explained starting on Introduction
of advanced operations on page 28.				!	Even when you select other sources, 2 to 6
					indicators are displayed.
				!	This unit’s phone call reception is on standby
				!	when ignition switch is set to ACC or ON.
					The line-of-sight distance between this unit
					and your cellular phone must be 10 meters or
					less for sending and receiving voice and data
					via Bluetooth wireless technology. However,
					the transmission distance may become short-
		
					er than the estimated distance, depending on
1 Device name					the environment in use.
				!	In order to use Bluetooth wireless technology,
Shows the device name of the cellular phone.
					devices must be able to interpret certain pro-
2 Signal level indicator
					files. This unit is compatible with the following
Shows the signal strength of cellular phone.
					profiles.
!	Signal level indicator may differ from
	the actual signal level.				— GAP (Generic Access Profile)
					— SDP (Service Discovery Protocol)
!	If the signal level is not available, this in-
	dicator is not displayed.				— OPP (Object Push Profile)

3 User number indicator — HFP (Hands Free Profile)

02

English

En 25

<CRD4206-A/N>25