Pioneer DEH-P8950BT Storing and recalling broadcast frequencies, Using the remote control

Black plate (12,1)

Section

02Operating this unit

Note

Listening AM radio while connecting iPod to this unit may generate noise. In this case, disconnect iPod from this unit and noise is disappeared.

#You can also recall radio station frequencies assigned to preset tuning numbers by pushing MULTI-CONTROL up or down during the fre- quency display.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.

1When you find a frequency that you want to store in memory press LIST.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number; press and hold to store.

The preset number you have selected will flash and then remain lit. The selected radio station frequency has been stored in memory.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30 seconds, the display is automatically returned to the ordinary display.

Using the remote control

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.

The next time you press the same preset tun- ing button the radio station frequency is re- called from memory.

12 En

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se- lect.

The function name appears on the display.

3Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

BSM (best stations memory)—Local (local

seek tuning)

# You can also select the function by pressing

FUNCTION on the remote control.

# To return to the frequency display, press

BAND.

# If you do not operate functions within about

30seconds, the display is automatically returned to the ordinary display.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under 1 to 6 on the remote control and once stored there you can tune in to those frequencies with the touch of a button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6 on the remote con- trol.

<CRD4206-A/N>12