Pioneer DEH-P8950BT operation manual Connecting a cellular phone, Disconnecting a cellular phone

	Black plate (29,1)
	Section
Operating this unit	02

Connecting a cellular phone

To use a phone wirelessly with this unit, it is necessary first to establish a connection using Bluetooth wireless technology. There are sev- eral ways you can do this.

!A phone may be connected via Bluetooth wireless technology but not yet registered with this unit. In this case it is said to be temporarily connected, and the available features are limited. To take full advantage of all the features available, we recommend you register your phone with this unit. Refer to Registering connected cellular phone on the next page for more on this.

Searching for available cellular phones

You can have this unit search for any available phones in the area that have Bluetooth wire- less technology, then select which you want to connect to from a list displayed on-screen.

1Use MULTI-CONTROL to select Search&Connect in the function menu.

2Press MULTI-CONTROL to search for available cellular phones.

While searching, Searching is displayed. When available cellular phones featuring Bluetooth wireless technology are found, de- vice names or Not found (if names cannot be

obtained) are displayed.

# If this unit fails to find any available cellular phones, Not found is displayed.

3Push MULTI-CONTROL up or down to select a device name you want to connect.

#The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 46.

Using a cellular phone to initiate a connection

Putting the unit in Connection open mode al- lows you to establish a Bluetooth wireless con- nection from your phone. You may need to refer to the operation manual that came with your phone if you are unsure how to initiate a connection from your phone.

1Use MULTI-CONTROL to select Connection open in the function menu.

2Press MULTI-CONTROL to open the con- nection.

Always waiting is displayed and the unit is now on standby for connection from cellular phone.

3Use cellular phone to connect to this

unit.

# Operation varies depending on the type of your cellular phone. Refer to the instruction man- ual that came with your cellular phone for de-

tailed instructions.

# You may need to enter the link code on your

cellular phone to complete the connection.

# The link code is set to 0000 as default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 46.

English

4Press MULTI-CONTROL to connect the selected cellular phone.

While connecting, Connecting is displayed. To complete the connection, please check the device name (e.g., Pioneer BT unit) and enter the link code on your cellular phone. If the connection is established, Connected is dis-

played.

# If the connection failed, ERROR is displayed. Check the cellular phone, then try again.

Disconnecting a cellular phone

When you are done using your phone with this unit, you can close the Bluetooth wireless con- nection.

1Use MULTI-CONTROL to select Disconnect phone in the function menu. Device name of the connected phone appears in the display.

En 29

<CRD4206-A/N>29