Pioneer DEH-P8950BT Registering connected cellular phone, Deleting a registered phone

Black plate (30,1)

Section

02Operating this unit

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After the disconnection is completed, Disconnected is displayed.

Registering connected cellular phone

You can register a phone that is temporarily connected to this unit in order to take full ad- vantage of the features available with Blue- tooth wireless technology. A total of three phones can be registered.

1Use MULTI-CONTROL to select Set phone in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)

Deleting a registered phone

If you no longer need to use a registered phone with this unit, you can delete it from the registration assignment for another phone.

!If a registered phone is deleted from this unit, the Phone Book and other settings of that phone are cleared simultaneously.

1Use MULTI-CONTROL to select Delete phone in the function menu.

2Push MULTI-CONTROL up or down to select a registration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)

# If the assignment is empty, No data is dis-

played and the operation is not possible.

# If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

#As you select each assignment, you can see whether or not a phone is already registered there. If the assignment is empty, No data is dis- played. If the assignment is already taken, the de- vice name appears. To replace an assignment with a new phone, first delete the current assign- ment. For more detailed instructions, see Deleting a registered phone on this page.

#If you need to know the BD (Bluetooth Device) address of the phone, push MULTI-CONTROL left here.

3Press MULTI-CONTROL to register the currently connected phone.

When the registration is completed,

Reg. Completed is displayed.

# If the registration failed, Reg. ERROR is dis- played. In this case, return to step 1 and try again.

Note

Depending on the type of cellular phone, registra- tion is available only from a cellular phone. (Refer to Using a cellular phone to initiate a connection on the previous page.)

3Push MULTI-CONTROL right to select Delete YES.

Delete YES is displayed. Deleting phone is

now on standby.

# If you do not want to delete a registered phone, push MULTI-CONTROL left. The display reverts.

4Press MULTI-CONTROL to delete the phone.

After the phone is deleted, Deleted is dis- played.

Connecting to a registered cellular phone

Once your phone is registered with this unit it is a simple matter to establish a Bluetooth wireless connection, either manually by select- ing a registration assignment, or automatically when a registered phone is within range.

30 En

<CRD4206-A/N>30