Black plate (11,1)

Operating this unit

! External unit refers to a Pioneer product (such

Tuner

as one available in the future) that, although

Basic Operations

incompatible as a source, enables control of

basic functions by this unit. Two external units

Important

can be controlled by this unit. When two exter-

 

 

 

 

 

 

 

nal units are connected, the allocation of

If you are using this unit in North, Central or

them to external unit 1 or external unit 2 is

South America, reset the AM tuning step (see

automatically set by this unit.

Setting the AM tuning step on page 43).

! When this unit’s blue/white lead is connected

  

to the vehicle’s auto-antenna relay control

 

 

 

 

 

 

 

terminal, the vehicle’s antenna extends when

 

 

 

 

 

 

 

 

 

 

 

 

 

 

this unit’s source is turned on. To retract the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

antenna, turn the source off.

 

 

 

 

 

 

 

Adjusting the volume

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Section

02

English

% Use MULTI-CONTROL to adjust the sound level.

1 Band indicator

2 Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

3 LOC indicator

Shows when local seek tuning is on.

4 Preset number indicator

5 Frequency indicator

1 Press SOURCE to select the tuner.

2 Press BAND to select a band.

Press BAND until the desired band is dis- played, FM-1, FM-2, FM-3 for FM or AM.

3 To perform manual tuning, push MULTI-CONTROL left or right.

4 To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

# You can cancel seek tuning by pushing MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

En 11

<CRD4206-A/N>11

Page 11
Image 11
Pioneer DEH-P8950BT operation manual Tuner, Basic Operations, Adjusting the volume