4.10 PTZ
From the selected LIVE entire screen SINGLE mode, press the PTZ button to adjust camera Pan, Tilt, Zoom or view the screen in preset (PTZ value for camera setup in advance) state. There are no PTZ related buttons on the remote controller.
4.10.1 PTZ adjustment
9After pressing the PTZ button from the single screen, put the cursor on the P button and adjust using the shuttle.
9To adjust camera TILT, after pressing the PTZ button from the single screen, put the cursor
on the T button and adjust using the shuttle.
9To adjust camera ZOOM, after pressing the PTZ button from the single screen, put the
cursor on the Z button and adjust using the shuttle.
9 To adjust camera focus, put the cursor on the F button and adjust using the shuttle.
Jog dial can only cause movement in 1x speed. By increasing the shuttle ring rotation angle, movement in 2x, 4x, 8x speed is possible for the shuttle ring.
9After adjusting, if the A button is pressed with the mouse or if the ENTER button, located on the front of DVR, is pressed after the A button is selected, focus is adjusted automatically.
9To exit the PTZ mode, press the mouse right button or the ESC key.
PTZ mode can only be used in LIVE screen and cannot be setup in MULTI mode. It must be setup as SINGLE mode in the LIVE screen.
4.10.2 Preset setup
9Select a desired channel from channel
9Press PTZ to select the PTZ mode (PTZ is displayed in the upper right corner of the screen.)
44
