Sanyo PLC-XP100BKL Resetting the Lamp Counter, Maintenance and Care, Order Replacement Lamp

Maintenance and Care

Resetting the Lamp Counter

Be sure to reset the Lamp counter after the lamp is replaced. When the Lamp counter is reset, the LAMP REPLACE indicator stops lighting and the Lamp replacement icon disappears.

1	Press the MENU button to display the On-Screen Menu. Use	Lamp counter
	the Point 7 8 buttons to move the red frame pointer to the
	Setting Menu icon
2	Use the Point ed buttons to move the red frame pointer
	to Lamp counter and then press the SELECT button. A
	dialog box appears showing the total accumulated time of
	the lamp usage and the reset option. Select Reset and the
	“Lamp replacement coutner Reset?” appears. Select [Yes] to
	continue.
3	Another confirmation dialog box appears and select [Yes] to
	reset the Lamp counter.

✔Note:

•Do not reset the Lamp counter without replacing the lamp. Be sure to reset the Lamp counter only after replacing the lamp.

Select Reset and the “Lamp replacement counter Reset?” appears.

Select [Yes], then another confirmation box appears.

Select [Yes] again to reset the lamp counter.

ORDER REPLACEMENT LAMP

Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer.

●	Model No.. of your projector	:	PLC-XP100L/ PLC-XP100BKL
●	Replacement Lamp Type No.	:	POA-LMP108
			(Service Parts No. 610 334 2788)

60