Sanyo PLC-XP100BKL, PLC-XP100L Side Control and Indicators, Indicators on the top panel

Part Names and Functions

Side Control and Indicators

Side Control		Indicators (on the top panel)
q		u
w
e		i
	r	o
		!0
		!1

ty

qON/STAND-BY button

Turn the projector on or off (pp.23–24).

wINPUT button

Select an input source (pp.31–33).

eLENS button

Enter the focus, zoom, and lens shift adjustment mode (p.27).

rPoint ed7 8 buttons

–Select an item or adjust the value in the On- Screen Menu (p.25).

–Pan the image in Digital zoom + mode (p.40).

tMENU button

Open or close the On-Screen Menu (p.25).

ySELECT button

–Execute the selected item (p.25).

–Expand or compress the image in the Digital zoom mode (p.40).

uPOWER indicator

–Light when in stand-by mode and during operations.

–Blink in the Power management mode (p.52).

iLAMP indicator

Light red during operations.

oLAMP REPLACE indicator

Light orange when the projection lamp reaches its end of life (pp.59, 70).

!0WARNING FILTER indicator

–Blink slow when the filter is being scrolled (pp. 56, 69).

–Blink fast when the filter scroll is not working properly or the filter cartridge is not installed (p.56, 70).

–Light orange when the clogging of the filter is detected or the filter counter reaches a time set in the timer setting, urging immediate filter/ filter cartridge replacement (p.55, 56 70).

!1WARNING TEMP.. indicator

Blink red when the internal temperature of the projector exceeds the operating range (pp.63, 69- 70 ).

12