Sanyo PLC-XP100L owner manual Basic Operation, FILTER button, NO SHOW button, MOUSE POINTER button

Basic Operation

FILTER button

Press and hold the FILTER button for more than five seconds to operate electrically operated filter to replace the filter.

NO SHOW button

Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button.

“No show” disappears after 4 seconds.

MOUSE POINTER button

Move the pointer on the screen with this button.

POINTER button

Press POINTER button on the remote control to display the Pointer on the screen.

Remote Control

	MOUSE
	POINTER
	button
	POINTER
P-TIMER	button
button	KEYSTONE
	button
FILTER	NO SHOW
button	button

✔Note:

•See the previous page for the description of other buttons.

P-TIMER button

Press the P-TIMER button on the remote control. The Timer display “00 : 00” appears on the screen and starts to count time (00 : 00–59 : 59).

To stop the P-TIMER, press the P-TIMER button.P-Timer display To cancel the P-TIMER, press the P-TIMER button again.

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.40, 44).

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled.

•“Keystone” disappears after 10 seconds.

Reduce the upper width with	Reduce the lower width	Reduce the left part with
Point e button.	with Point d button.	Point 7 button.

Reduce the right part with Point 8 button.

29