Chapter 4. Operation method

4.1Preoperation inspection items

™Make sure you verify the input power source voltage before turning on the power.

™If product used for NTSC is used with a PAL device, it may malfunction initially(recognize as a NTSC device). In this case, if power is turned OFF and ON again, it will recognize the PAL device properly.

4.2Connection of power supply

™After connecting the product with other equipment including the power supply cable, turn ON the power by pressing the stand-by switch button in front of the product.

™When product is turned ON, video signal presence is recognized automatically.

™Even if there is a sudden power failure, all setup value will be maintained.

™If the product is setup to input a password when product is turned ON and OFF, enter the password. Product cannot be turned ON or OFF without entering the password in this case.

4.3Live screen

When the product is turned ON, live screen, which is a surveillance screen, is displayed.

STAND-BY SWITCH

SVR-1650/1640

SVR-950

32

Page 34
Image 34
Samsung SVR-950, SVR-1640 user manual Preoperation inspection items, Connection of power supply, Live screen