SVR-1650/1640/950 User Manual

9Press (PAN) / (TILT) / (ZOOM) and use the mouse and jog/shuttle to take the screen to the desired PTZ state.

9Use PRESET located below PTZ and setup the value with the mouse (1~255).

1.If PTZ (P-Set) is displayed in the upper part of the screen, Channel 116 (SVR-950: channel1~9) displays the preset number to setup (1~255) rather than the corresponding channel.

2.Preset may be setup by pressing the ‘ENTER’ key, located in the front of DVR, or the mouse button after moving the cursor to S .

4.10.3Preset utilization

9

Select a desired channel from channel 1~16(SVR-950: channel 1~9) and select the entire

4

 

screen mode.

9Press PTZ to select the PTZ mode (PTZ is displayed in the upper right corner of the screen.)

9Use the mouse on PRESET, located below PTZ on the screen, to setup the value (1~255).

9 If the desired button between Channel 1~16(SVR-950: channel 1~9) is pressed, the cursor is moved to the M button and the ENTER key located on the front of DVR is pressed, the camera operates with preset values setup in advance.

4.10.4 Using OSD for the Speed Dome Camera

9 After pressing the PTZ button from the single screen, if either the ENTER key in the front of the DVR or the mouse button is pressed after moving the cursor to ……o , OSD for the

speed dome camera and the following message will be displayed: ‘PTZ OSD’.

9OSD cursor for the speed dome camera may be moved up/down and left/right by using ▲▼◀▶ keys in the front of the DVR.

9Changes in OSD for the speed dome camera may be setup or cancelled by using ENTER and ESC keys in the front of the DVR.

9OSD function for the speed dome camera can be terminated by pressing the PTZ button in the front of the DVR.

45

Page 47
Image 47
Samsung SVR-1640, SVR-950 user manual Preset utilization, Using OSD for the Speed Dome Camera