9SUBNET MASK : Input the [SUBNET MASK] address obtained from the internet service company of the user.
9GATEWAY : Input the [GATEWAY] address obtained from the internet service company of the user.
9DNS : Input the [DNS] address obtained from the internet service company of the user.
9PORT : [PORT] assigned when connecting to a computer can be changed. If port is changed in the DVR, When the network setup is changed, it takes time to setup the network module again. Connect after 1~2 minutes. Port number can be setup depending on network conditions (firewall etc.).
DEFAULT PORT : 4000
9 SWR : If the product is connected to a cable modem or a xDSL modem, IP address will change each time connection to ISP (User’s communicaton company server) is attempted. In this case, the user will not know the changed IP address. If a product using a floating IP is registered on the SWR server, the changed IP can be found when attempting connection with the product. To register an IP address on the SWR, setup [SWR] item to ON. Changed IP address can be verified from
5.9.2 RS-232
Setup items needed to connect with the computer connected to the product through the serial port.
9BAUD RATE : Setup the data transmission speed per second.
9DATA BIT : Setup the data transmission bit.
9PARITY BIT : Setup the error check method for data transmission.
9STOP BIT : Setup bit to include when data transmission has been completed.
80
