Pioneer DEH-P8950BT operation manual Setting up for Bluetooth audio player, CRD4206-A/N22

Black plate (22,1)

Section

02Operating this unit

Even though your audio player does not con- tain a Bluetooth module, you can still control it from this unit via Bluetooth wireless technol- ogy using a Bluetooth adapter (sold sepa- rately).

1

1Device name

Shows the device name of the connected Bluetooth audio player (or Bluetooth adapter).

1Press SOURCE to select Bluetooth audio

player.

# If you cannot display BT Audio, first activate the BT audio source in the initial setting. For de- tailes, refer to Activating the BT Audio source on

page 46.

# For this unit to control your Bluetooth audio player it needs to establish a Bluetooth wireless connection. (Refer to Connecting a Bluetooth audio player on the next page.)

2To perform fast forward or reverse, push and hold MULTI-CONTROL left or right.

3To skip back or forward to another track, push MULTI-CONTROL left or right.

Setting up for Bluetooth audio player

Setting up of this unit is required before using Bluetooth audio player.

1 Activation

Refer to Activating the BT Audio source on page 46 for instructions on how to turn the BT Audio on.

# BT Audio is set to on by default.

2 Connection

To connect your Bluetooth audio player to this unit, refer to Connecting the most recently con- nected Bluetooth audio player on the next page and Connecting a Bluetooth audio player on the next page.

#Once connected via Bluetooth wireless tech- nology, “Play”, “Stop” and “Pause” on Bluetooth audio player can be operated in the BT Audio source.

#Before you can use audio players you may need to enter the PIN code into this unit. If your player requires a PIN code to establish a connec- tion, look for the code on the player or in its ac- companying documentation. Enter the PIN code referring to Entering PIN code for Bluetooth wire- less connection on page 46.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option; press to se- lect.

The function name appears on the display.

3Turn MULTI-CONTROL to select the function.

Turn MULTI-CONTROL to switch between the functions in the following order:

Connection open (connection open)— Disconnect audio (disconnect audio)— Connect audio (connect audio)—Play (play)

—Stop (stop)—Pause (pause)—

Auto connect (auto connect)—Device info.

(device information)

# If a Bluetooth audio player is connected via A2DP profile, only Disconnect audio,

Auto connect and Device info. appear in the function menu.

22 En

<CRD4206-A/N>22