Panasonic DMC-LS70, DMC-LS75, DMC-LS60 operating instructions 101

	Others
■ Playback
Conditions	Causes
Pictures rotate	One of the features of this unit can automatically detect when
unexpectedly.	you have turned the camera side on to take a picture, then
	rotate that picture for you when you play it back.
	In some cases, the unit may detect that you have turned the
	camera sideways, when in fact you are facing it up or down.
	• Set [ROTATE DISP.] (P74) to [OFF] so that the camera
	does not rotate these kinds of pictures for you.
	• You can use [ROTATE] (P74) to rotate the pictures when
	necessary.
The picture is not played	Is the mode dial set to playback [Q]?
back.	Is there a picture on the built-in memory or the card?
	• The pictures on the built-in memory appear when a card is
	not inserted. The picture data on the card appears when a
	card is inserted. (P16)
Folder or file number	The picture may have been changed on a computer or taken
appears as [-] and the	on a different manufacturer’s camera.
display goes black.	This problem can also occur if you remove the batteries
	immediately after taking a picture or if the batteries had very
	little charge left.
	• You will need to reformat the card to delete this type of
	picture. (P83) (Remember that all data will be irretrievably
	erased when you format the card, so save your data and
	check the card before proceeding.)
The picture is displayed	Was the picture edited with a PC or recorded with a digital
with a date different from	camera from another manufacturer?
the actual recording date	This kind of picture may be displayed with a date different
in calendar playback.	from the actual recording date in calendar playback. (P68)
	Is the clock in the camera set properly? (P17)
	For example, if the clock setting on the camera is different
	from the date and time set on the PC and you acquire
	pictures recorded with the camera to the PC and then write
	them back to the card, the pictures may be displayed with
	dates different from the actual recording dates in calendar
	playback etc.

■Connecting to a TV, computer or printer

Conditions	Causes
The picture does not	Is the camera connected to the TV correctly?
appear on the television.	Set the TV to video input mode.
The TV screen is
disturbed or displayed in
monochrome.

101

VQT1C63