Panasonic DMC-LS70 Available flash settings by recording mode, Iso, Available flash range, Auto

Advanced-Shooting

*1 The flash is activated twice. The subject should not move until the second flash is activated.

■Available flash settings by recording mode

The available flash settings depend on the recording mode.

(○ : Available, — : Not available, ◎ : Initial setting)

*2 *2

*2 It becomes Forced ON [], when the

backlight compensation function is activated.

•The flash setting may change when you change the recording mode. Change the flash setting again if necessary.

•Flash settings are retained even if you switch the camera off. However, scene mode flash settings return to the factory settings when you change the scene mode.

■The available flash range to take pictures

ISO
sensitivity	Available flash range
(P61)
AUTO	30 cm (0.98 feet) to 4.7 m
	(15.42 feet) (Wide)
	30 cm (0.98 feet) to 2.6 m
	(8.53 feet) (Tele)
ISO100	30 cm (0.98 feet) to 1.8 m
	(5.91 feet) (Wide)
	30 cm (0.98 feet) to 1.0 m
	(3.28 feet) (Tele)
ISO200	40 cm (1.31 feet) to 2.6 m
	(8.53 feet) (Wide)
	30 cm (0.98 feet) to 1.4 m
	(4.59 feet) (Tele)
ISO400	60 cm (1.97 feet) to 3.7 m
	(12.14 feet) (Wide)
	40 cm (1.31 feet) to 2.1 m
	(6.89 feet) (Tele)
ISO800	80 cm (2.62 feet) to 5.3 m
	(17.39 feet) (Wide)
	60 cm (1.97 feet) to 2.9 m
	(9.51 feet) (Tele)
ISO1250	100 cm (3.28 feet) to 5.3 m
	(17.39 feet) (Wide)
	80 cm (2.62 feet) to 2.9 m
	(9.51 feet) (Tele)

•Refer to P107 for the focus range.

•When you use the flash when you have set ISO sensitivity to [AUTO] or set

ISO LIMIT in Intelligent ISO mode [] to anything other than [ISO400], ISO sensitivity automatically becomes a maximum of [ISO640] ([ISO400] in the [BABY1]/[BABY2] or [PET] scene modes (P47)).

•The edges of the picture may appear dark if you shoot a very close subject with the flash while the zoom lever is close to the W side. Zoom in slightly if this occurs.

41

VQT1C63