Panasonic DMC-LS75, DMC-LS60, DMC-LS70 operating instructions 102

	Others
Conditions	Causes
The display areas on	Depending on the TV model, the area display may be smaller
the TV screen and the	so the picture may be stretched horizontally or vertically and
camera’s LCD monitor	the top and bottom or left and right of the picture may be cut
are different.	off when it is displayed. This is due to the TV specifications
	and is not a malfunction.
Cannot play motion	You cannot play motion pictures if you have inserted the card
pictures on a television.	into a card slot on a television.
	Connect the camera to the television with the included video
	cable and play the pictures on this unit. (P91)
The picture size does not	Check the [TV ASPECT] setting on this unit. (P23)
fit the TV screen.
Cannot upload pictures	Check the connections.
to your computer.	Check that the computer has correctly recognized the
	camera.
	Set the camera’s mode dial to a mode other than Print mode
	(P84).
The computer does not	Disconnect the USB connection cable, then insert the card
recognize the card.	and reconnect the cable.
(The built-in memory is
recognized.)
The pictures cannot be	Does the printer support PictBridge? You cannot print
printed with printers.	pictures with printers which do not support PictBridge. (P87)
	Set the camera’s mode dial to Print mode (P87).
The sides of printed	• If your printer has trimming and border settings, change the
images are cut off.	settings so that there is no trimming and no border. (Read
	your printer’s operating instructions.)
	• Some photography shops can handle pictures shot in the
	[j] aspect ratio (P62). Enquire before sending them for
	printing.
■ Others
Conditions	Causes

Unreadable language Press [MENU/SET], select the [SETUP] menu icon [] and was selected by mistake. then select the [{] icon to set the desired language. (P23)

Cannot change the auto	You cannot change the auto review setting when using burst
review setting.	mode or shooting motion pictures.
When the shutter button	In dark places, the AF assist lamp (P66) lights red to make it
is pressed halfway,	easier to focus on a subject.
a red lamp turns on
sometimes.

102

VQT1C63