Panasonic DMC-LS75, DMC-LS60, DMC-LS70 operating instructions LCD monitor and changes to the display

Preparation

LCD monitor and changes to the display

■ Display in normal picture mode [								].
(at the time of purchase)
1	2	3	4	5	6	7
13				7M
	1					19	8	9
							10
12							11

1Recording mode

2Flash mode (P40)

•The flash icon turns red when activating the flash and pressing the shutter button halfway.

3AF area

•The AF area displayed is bigger than usual when taking pictures in dark place.

4Focus (P25)

5Picture size (P62)

6Quality (P62)

6: Jitter alert indication (P27)

7Battery indication

•The battery indication turns red and blinks. (The status indicator blinks when the LCD monitor is turned off.) Replace with new batteries or fully charged Ni-MH batteries.

•It does not appear when using the AC adaptor (DMW-AC6; optional).

8Remaining number of recordable pictures

9Recording indication

10Built-in memory / Card

( or lights red during accessing.)

•Do not do the following when the access indication lights.

–Turn the camera off.

–Remove the batteries or the card (if used).

24

–Shake or impact the camera.

–Disconnect the AC adaptor (DMW-AC6; optional). (when using the AC adaptor)

•Observe the above caution also when pictures are being read or deleted or the built-in memory (or the card) is being formatted (P83).

•The access time for the built-in memory may be longer than the access time for a card. (Max. about 7 sec.)

11 Shutter speed (P25)

12 Aperture value (P25)

•If the exposure is not adequate, the aperture value and the shutter speed turn red. (They do not turn red when the flash is activated.)

13 Optical image stabilizer (P64)

•For details about other displays, see page 92.

■Changing the display

Press [DISPLAY] to change the display. Choose whether to display information such as the number of pixels and possible number of images for recording while you are shooting. For details, see page 37.

VQT1C63