Panasonic DMC-LS60, DMC-LS75 Card, Conditions under which a different folder number is used

Connecting to other equipment

■Folder Composition Folders appear as follows.

• Built-in	DCIM				100_PANA
memory		100_PANA				1
• Card			P1000001.JPG
				2	3
			P1000002.JPG
			P1000999.JPG
		101_PANA
		999_PANA
	MISC

1Folder number

2 File number

3 JPG : Pictures MOV : Motion pictures

MISC : Folder containing files with DPOF settings.

•This unit stores up to 999 picture files in each folder. A new folder is created after this maximum is reached.

•To reset file and folder numbers, use [NO.RESET] in the setup menu. (P22)

■Conditions under which a different folder number is used

In the following cases, the picture is not recorded in the same folder as the previously recorded picture. It is recorded in a folder with a new number.

•The folder containing the picture you just shot had a file numbered 999 in it (example: P1000999.JPG).

•When the card just recorded to contains, for example, a folder with the number 100 (100_PANA) in it and that card is removed and replaced with a card that has a folder with the number 100 in it recorded by a camera from a different maker (100XXXXX, with XXXXX being the name of the maker) and then a picture is recorded.

•You start shooting again after using [NO.RESET] in the setup menu (P22). (It is recorded to a new folder that has a number following on from the one previous. You can also reset the folder number to 100 by using [NO.RESET] immediately after formatting the card when there are no folders or pictures on the card.)

■Connection in the PTP mode Windows XP/Mac OS X users can establish connection in the PTP mode by

setting the camera in print mode [ ] and connecting it to their PC.

• You can only load pictures from the camera and cannot write them on the card or delete them.

• When there are 1000 or more pictures on a card, the pictures may not be imported.

85

VQT1C63