Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
4Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not included) to the desired height of projector mount assembly. Attach projector mount assembly (A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in figure 4.1 or figure 4.2.
1/4-20 THREADED ROD (NOT INCLUDED)
| | 1/4-20 |
| | THREADED |
| | ROD (NOT |
| | INCLUDED) |
| 1/4-20 HEX THIN | |
| NYLON-INSERT | |
| LOCKNUT (NOT | 1/4-20 HEX |
| INCLUDED) |
| THIN NYLON- |
| |
| | INSERT |
| | LOCKNUT |
| ARROW | (NOT |
| INCLUDED) |
| INDICATES |
| |
| FRONT OF | |
| MOUNT | |
ARROW INDICATES FRONT OF MOUNT
1/4-20 HEX THIN NYLON-INSERT LOCKNUT (NOT INCLUDED)
A
1/4-20 HEX THIN NYLON- INSERT LOCKNUT (NOT INCLUDED)
8 of 51 | ISSUED: 09-30-09 SHEET #: 056-9024-5 07-18-11 |
