Projector Alignment
10 To adjust yaw (swivel) for threaded rod mounting applications: Loosen locknuts for threaded rods (step 4) until projector mount can be rotated. Rotate mount to desired position and retighten locknuts.
To adjust yaw (swivel) for extension column applications: Loosen screw on projector mount assembly (A) indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw.
To adjust pitch (forward and backward tilt): Turn knob on back of mount as shown below. Pull knob out and turn by hand for easy adjustment or insert #2 phillips screwdriver in end of knob and turn.
To adjust roll (side to side tilt): Turn knob on side of mount as shown below. Pull knob out and turn by hand for easy adjustment or insert #2 phillips screwdriver in end of knob and turn.
ARROW INDICATES FRONT OF | A |
MOUNT |
KNOB FOR PITCH
ADJUSTMENT
ACCESS SLOT FOR OPEN END WRENCH ALLOWS TIGHTENING OF LOCKNUTS WITHOUT REMOVING PROJECTOR
KNOB FOR ROLL
ADJUSTMENT
SCREW FOR YAW (SWIVEL) STOP (REFER TO STEP 1, FIG. 1.2)
13 of 51 | ISSUED: |
