Others

Troubleshooting

If you put the menu back to the settings at the time of purchase, the conditions may be improved. Carry out the [RESET] in the setup menu. (P23)

Batteries and power supply

Conditions

Causes

The camera turns off

The remaining battery power may not be displayed

immediately even when

accurately, and the camera may suddenly stop working, when

battery power is full.

the type of battery and the settings on [BATTERY TYPE] are

The remaining battery

not identical. However this is not a malfunction. Depending

power is low even if new

on the battery brand and the operating temperature, or if

batteries are inserted.

exhausted batteries are used, the remaining battery power

 

may not be displayed accurately.

 

Please check [BATTERY TYPE] (P21) in the [SETUP] menu.

The camera will not turn

Are the batteries inserted correctly?

on.

Use sufficiently charged batteries when using Ni-MH

 

batteries.

The picture is not

Is the power save mode (P21) or economy mode (P22)

displayed on the LCD

activated? Press the shutter button halfway to deactivate

monitor.

these modes.

 

Are the batteries exhausted? Replace them with batteries

 

which have sufficient capacity. (When you use Ni-MH

 

batteries, charge them.)

The camera turns off

• Are the batteries exhausted? Replace them with batteries

soon after turning it on.

which have sufficient capacity. (When you use Ni-MH

 

batteries, charge them.)

 

• If you leave the camera on, the battery will be exhausted.

 

Turn the camera off frequently by using power save mode

 

(P21) or economy mode (P22) etc.

Shooting

 

 

 

Conditions

Causes

The picture cannot be

Is the mode dial correctly set?

recorded.

Is there any memory capacity left on the built-in memory or

 

the card?

 

Before recording, delete some pictures. (P35)

The recorded pictures

The picture can become whitish if there is dirt e.g. fingerprints

are pale.

on the lens. If the lens is dirty, turn on the camera, eject the

There is dirt on the lens.

lens barrel (P9) and gently wipe the lens surface with a soft

 

dry cloth.

The recorded picture is

Check that the exposure is correctly compensated. (P44)

too bright or dark.

 

98

VQT1C63

Page 98
Image 98
Panasonic DMC-LS70, DMC-LS75, DMC-LS60 operating instructions Troubleshooting