Basic

3Press w/q to select the picture and then press r to set.

(Only when selecting [MULTI DELETE])

MULTI DELETE

7 8 9

10 11

SELECT DELETE

MARK/UNMARK EXIT MENU

Repeat the above procedure.

The selected pictures appear with [A]. When r is pressed again, the setting is canceled.

The icon [c] blinks red if the selected picture cannot be deleted. Cancel the protect setting. (P79)

4Press [A].

5Press e to select [YES] and then press [MENU/SET] to set.

(Screen when selecting [MULTI DELETE])

MULTI DELETE

DELETE THE PICTURES

YOU MARKED ?

 

YES

 

 

 

NO

 

MENU

 

 

 

SELECT

 

SET MENU

SET

When you delete all pictures, only pictures in either of the built-in memory or the card can be deleted. (You cannot delete pictures in both the built-in memory and the card at the same time.)

[DELETE ALL PICTURES ON THE BUILT-IN MEMORY ?] or [DELETE ALL PICTURES ON THE MEMORY CARD ?] is displayed when using [ALL DELETE], and [DELETE ALL EXCEPT ?] is displayed when using [ALL DELETE EXCEPT ].

If you press [MENU/SET] while deleting pictures using [ALL DELETE] or [ALL DELETE EXCEPT ], the deleting will stop halfway.

36

Do not turn off the camera while deleting.

When deleting pictures, use batteries with sufficient battery power (P24) or use the AC adaptor (DMW-AC6; optional).

It is possible to delete up to 50 pictures at one time using [MULTI DELETE].

The more pictures there are to delete, the more time it takes.

In the following cases, pictures are not deleted even if [ALL DELETE] or [ALL DELETE EXCEPT ] is selected.

When the Write-protect switch of the SD Memory Card or SDHC Memory Card is set to the [LOCK] side (P16)

When files do not conform to the DCF (P34)

When pictures are protected [c] (P79)

VQT1C63

Page 36
Image 36
Panasonic DMC-LS75, DMC-LS60 Press w/q to select the picture and then press r to set, Only when selecting Multi Delete