Panasonic DMC-LS75, DMC-LS60, DMC-LS70 Connecting to a PictBridge-compliant Printer, To connect

Connecting to other equipment

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing on the LCD monitor. Make the necessary settings on your printer beforehand. (Read your printer’s operating instructions.)

1Turn on the camera and the printer.

2Set the mode dial to [ ].

•[PLEASE CONNECT TO THE PRINTER] appears.

3Connect the camera to a printer via the USB connection cable A

(supplied).

•Connect the USB connection cable with the [c] mark facing the [q] mark on the [DIGITAL] socket.

•Hold C and then insert or pull the USB connection cable straight.

•Do not use any other USB connection cables except the supplied one.

•When you connect the camera to a printer without setting the mode dial to

[ ], remove the cable, set the mode dial to [ ], turn the camera and the printer off and on, and connect again.

•If a card is not inserted when the camera is connected to the printer, you can print the picture data on the built-in memory. If a card is inserted, you can print the picture data on it.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. When you want to switch between the built-in memory and the card, disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

•To print the age in [BABY1]/[BABY2]

and [PET] in scene mode (P47) or the departure date for [TRAVEL DATE] (P55), use the software [LUMIX Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD- ROM (supplied) and print from the PC. For information about this, refer to the separate operating instructions for PC connection.

•To find out more about PictBridge compliant printers, contact your local dealer.

■To connect

A

C

V.OUT

DIGITAL

DC IN

3V

B

A: USB connection cable (supplied) B : AC adaptor (DMW-AC6; optional)

•It may take time to print some pictures. Use batteries with sufficient battery power (P24) or the AC adaptor (DMW-AC6; optional) when you connect to a printer.

•Make sure this unit is off before connecting or disconnecting the AC adaptor (DMW-AC6; optional).

C: Check the facing of the connector and push straight in.

87

VQT1C63