GETTING STARTED
Always use an appropriate table or stand when positioning your TV.Allow enough space to tilt the TV. For best viewing, avoid locating the TV where direct sunlight or indoor lighting will fall on the screen. (Note: CLT1554 measurements are in the parenthesis.)
1Insert AC Adaptor into the DC input terminal on the TV.
2Insert AC power cord into Adaptor; then insert the plug fully into a 120V, 60Hz, AC power outlet.
BACK OF TV DC POWER INPUT TERMINAL
AC
ADAPTOR
To change the viewing angle of your LCD TV, position your hand on the top and hold the stand firmly, then tilt the LCD screen forward or backward. CAUTION: Do not position hand under the screen while tilting the TV forward.
Note: Maximum tilt is 5º to the front and 10º to the back.
REMOVING THE TV TILT STANDTools Needed: Phillips screwdriver
Important Note: Position TV face down on a padded or cushioned surface to protect the screen and finish.
1Remove the screw from the stand back cover.
2Remove four (4) screws from the metal bracket. CAUTION: Hold the stand firmly as you remove the last screw.
3Carefully remove the TV stand.
1
2
AC CORD
POWER OUTLET
(HOUSEHOLD)
Warning: This 12V AC/DC product is 
intended for indoor home use only. It is not to be exposed to high outdoor ambient
temperatures found in automotive, marine, and aviation environments.
1
2
Need help? Visit our Web site at www.sanyoctv.com or Call | 5 |