GETTING STARTED

INSTALLING BATTERIES IN THE REMOTE CONTROL

Use 2 “AAA” batteries (Not supplied).

Be sure batteries are installed correctly.

Note: Do not mix old batteries with new ones or mix different types of batteries together.

CONNECTING CABLE SERVICE, RF ANTENNA, OR SATELLITE RECEIVER TO THE TV

Cable Service

RF Antenna

Satellite Receiver

VCR Back

CATV FRANCHISE NOTE: Cable companies, like public

TV Back utilities, are franchised by local government authorities. To receive cable programs, even with equipment which is capable of receiving cable channels, the consumer must subscribe to the cable company’s service.

Operational Tip for No

Signal Connection:

If the TV is used as a monitor only, with a DVD player or some other type of external equipment, and no cable or antenna signal is available, the following setup is necessary:

Your TV is designed to automatically search for available channels. There- fore, the initial start up requires that you press the MENU key, enabling the TV to automatically go through the channel search process before you can operate the TV. After the initial channel search is completed, you must press the MENU key again to complete the channel search process. This may take several minutes.

After the channel search process is complete (2 searches), you can press the INPUT key on the remote control to use the TV as a monitor.

■TV will automatically select the correct Antenna mode for the type of Analog RF signal connected automatically.

Use “Antenna Selection” in the Setup menu to change the Antenna Mode.

■TV will switch off automatically after 15 minutes if there is no signal reception (cable out or station not broadcasting).

Exception—When the Video mode is selected, the TV will not automatically switch off when signal reception has stopped for 15 minutes.

■If you move the TV to a new location, press the RESET key twice after connecting the signal and turning on the TV.

6

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032