USING THE AUDIO/VIDEO INPUT JACKS
CONNECTING A VCR OR DVD PLAYERSwitch off TV and external equipment before connecting cables. (Cables are not supplied.)
1
2
3
Connect VCR, DVD Player, or other equipment’s Audio Video Out to the TV Audio Video Input. For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input. Optional (1 / 2)
Connect DVD Player or other equipment’s
Connect DVD Player or other equipment’s Audio Out to the TV Audio In Jacks.
Press POWER to turn on the TV. Turn on external equipment also.
Press the INPUT key to select VIDEO1 or VIDEO2.
Back View of VCR | TV AV Input Jacks | DVD Player |
|
| 2 | What you will need |
| for connections: | |
1 | 1 | 1 A/V Cable – 1 |
OPTIONAL CONNECTION | ||
|
| 1 |
| Remote Control | 2 Audio Cable – 1 |
|
|
|
3 2
■Press the INPUT key after connecting cables to access the A / V Inputs. There is NO need to tune to a blank channel.
■Make sure all cable connectors are fully seated on jacks.
■Always match A/V cables according to the colors; red for right audio, white for left audio and yellow for video.
■A solid Blue screen with the word VIDEO1 or VIDEO2, displayed means that the Video mode is selected, but no signal is being detected at the Video jacks. Check connections, turn on external equipment.
Need help? Visit our Web site at www.sanyoctv.com or Call | 9 |