Sanyo DAS-204 Remote control operation, Key s Function, Remote control security code

Q. Remote control operation

The DAS-204 allows you to perform many of its functions from a remote telephone. Follow these simple steps:

1. Call the answering system.

2. When the DAS-204 answers, press	*to skip the	OGM	. A long beep will
sound.
3. Enter the security code (factory default	159) to enter the Remote Control Mode.

4.Enter the key combination for the desired function as per the following table:

Key (s)			Function		Key (s)			Function
	1		Play OGM1			1		Record OGM1
	2		Play OGM2			2	Record OGM2
3		0	Record a Memo in	1	3	Room monitoring
		1	Record a Memo in	2	4	Change CBT code
		2	Record a Memo in	3	6	Change security code
	4		Repeat			8		Set to Answer-Only mode
	5		Play/Pause			9		Set to Answer-Record mode
5		0	Play all messages in	1
		1	Play all messages in		2
		2	Play all messages in		3
	6		Forward
		0	Play new messages in		1
		1	Play new messages in		2
		2	Play new messages in		3
	7		Erase individual message
		0	Erase all messages in		1
		1	Erase all messages in		2
		2	Erase all messages in		3

8Stop

9Set to Answering Machine OFF mode

#End remote control operation

R.Remote control security code

The security code is set to a factory default of				159. This code can be
changed to any number between 000 to 999. To change your security code,
perform the following steps:
1. Press and hold the		NEXT	❃ key for approximately 2 seconds until		Sc
appears in the display followed by the current security code. The DAS-
204 will then display the first digit of the security code. Use				NEXT	❃ or
REPT	❄ to change the number. Once you have arrived at the desired
number, press the		ANSWER	key to confirm your selection.

2.Repeat the process for the second and third digits.

3.If no key is pressed within 8 seconds, the setup procedure will be aborted.

4. When complete, press the	TIME/STOP/LANGUAGE	key to conclude
the procedure.

12 13