Sanyo DP19241 owner manual Remote control, Battery Precautions

Remote control

1
2
3	10
4	11
5	12
	13
6
	14
7
	15
8	16
9	17

1.POWER Button - Used to turn the power on/off to the LCD TV.

2.Direct Channel Selection Buttons (0-9) - Allows direct access to any channel of the LCD TV.

3.– Button -This button is the “–” button used when selecting digital channels. Also can display the current channel number when viewing the program.

4.SLEEP Button - To set the LCD TV to turn off after a preset amount of time, use the SLEEP button on the remote control.

5.CH (CHANNEL) + / – / CURSOR /

Buttons - Used to operate the menu functions of the LCD TV, and to change the channels of the

LCD TV.

6.MENU Button - Use to display the On-Screen menu function.

7.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. To use this function, select “Picture” or “Audio” in the menu screen, then press this button.

8.INPUT SELECT Button - Use to change the external input.

9.SCREEN SIZE Button - Used to change the picture size.

10.RECALL Button - This button allows you to go back to the previous channel selected by just pressing the RECALL button. Press this button again to return to the channel you were watching.

11.MUTE Button - To turn off the sound, press this button once. The LCD TV will be silenced and the symbol “Mute” will appear on the screen. The muting feature can be released by pressing the MUTE button again or one of the VOL (VOLUME) + or – buttons.

12.VOL (VOLUME) + / – / CURSOR		/ Buttons
- Used to operate the menu functions of the LCD
TV. Press the	button to increase, or the button
to decrease the sound level.

13.ENTER Button - Use to enter or select information for On-Screen operations.

14.EXIT Button - Press to remove setup menu.

15.CCD Button - Used to display the Closed Caption menu screen.

16.DISPLAY Button - When you press this button, the current information will be displayed on a screen. To remove the display from the screen, press this button again.

17.AUDIO Button - Change soundtrack language.

Before using the remote control, batteries must first be installed.

HOW TO INSTALL BATTERIES

1.Open the battery compartment cover.

2.Install two “AAA” batteries (not supplied).

3.Replace the battery compartment cover.

12

Use two “AAA” size batteries. The batteries may last approximately one year depending on how much the remote control is used. For best performance, it is recommended that batteries should be replaced on a yearly basis, or when the remote operation becomes erratic. Do not mix old and new batteries or different types.

BATTERY PRECAUTIONS

These precautions should be followed when using batteries in this device:

• Use only the size and type of batteries specified.

• Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)

3FR0321A_En.indd 12

1/7/11 4:32:09 PM