Sanyo DP19241 owner manual How to attach the stand, How to remove the stand

How to attach the stand

NOTE:

•Unplug the AC cord from the AC INPUT terminal.

•Before beginning this process, assure that TV is laid on a clean, safe, and cushioned space to avoid any damage to the unit.

•Do not touch or press the TV-screen, glass might break under pressure.

1.Place the TV on its back onto a table.

Align the stand’s bottom-plate (supplied) as seen here. It will fit in only one direction.

Hold the unit and attach the stand slowly.

LCD PANEL SIDE

2.Finally secure the bottom-plate with 2 screws (supplied).

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

How to remove the stand

When you transport this product, remove the stand and pack flat against the back of the unit in the carton. To remove the stand, perform the step below.

1.Place the TV on its back onto a table.	2. Pull the stand toward you again and remove the
Remove 2 screws with the bottom-plate.	stand from the TV.

For wall mounting, the base must be removed. To disconnect the base/stand remove the three (3) screws from the back (see page 7).

8

3FR0321A_En.indd 8

1/7/11 4:32:01 PM