ENERGY (POWER) SAVER

This power saving feature reduces the brightness level. The power saving function options:

•OFF – the feature is off and the power con- sumption is normal.

•LOW – power saving level is low and the bright- ness level is lower than normal.

•HIGH – power saving level is high and the bright- ness is set to the lowest level.

OPERATING TIP:

■The Energy saver settings level will vary depend- ing on the Picture/Sound mode. For instance, the energy low level settings may be different between the manual picture/sound mode (cus- tomized settings) than the auto mode (factory settings).

PICTURE ROTATION (SCREEN SAVER)

Displaying a still picture for a long time may cause an “afterimage” or “ghost” on the screen. To neutralize this situation, use the Picture Rotation function.

Note: When the Picture Rotation is set to ON, the DTV automatically changes the display position every 15 minutes to avoid afterimage.

WHITE PATTERN (PANEL REPAIR)Use this feature to repair the Plasma screen.

If an afterimage occurs, use the White Pattern feature immediately to repair the panel. The more severe the afterimage, the longer the curing process may take. It may be impossible to repair all cases of afterimage burn.

The sooner you remove a still picture and activate White Pattern, the more likely it is that the panel can be repaired.

Notes: Afterimage (or image burn) is not covered under warranty.

When the White Pattern is activated the screen will instantly turn completely white. The On time is automatically set for 30 minutes.

Pressing any key except Volume ▲▼, Mute, and Audio will cancel the curing process and return the DTV to normal viewing.

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032

15