Using the Multimedia Remote Control

QuickTips

■Be sure batteries are installed correctly.

■Point the remote control toward the equipment you want to operate. Objects between the remote control and the equipment may cause misoperation of the remote control function.

■If the remote control does not work: Press TV key (see item 1).

■The remote control must be programmed before it will operate your VCR, DVD Player, or Cable Box. See pages 9~11.

■Cannot select channel with number keys. Press “0” in front of numbers

1 ~ 9. Example: C 05.

■Adjusting the volume level: Right flashing arrow indicates volume is increasing

and Left flashing

▲ arrow indicates volume is decreasing.

Need help?

Visit our Web site at

www.sanyoctv.com

or Call 1-800-877-5032

Operates your TV, VCR, DVD, and Cable converter box. To program the remote control, see pages 9 ~ 11.

Install Battieres as shown (2 AA, not included)

Notes:

Do not mix old batteries with new ones or mix different types of batteries together.

Remove the batteries if the remote control will not be used for a month or more. Weak batteries may leak and cause damage. (Normal battery life is roughly six months.)

IMPORTANT NOTE: Spent or discharged batteries must be recycled or disposed of properly in compliance with all applicable laws. For detailed information, contact your local County Solid Waste Authority.

Remote Control Keys

➀Mode Keys—Use these keys to program the remote control and to select the operating mode (VCR, TV, or AUX).

To Operate Your...VCR—Press the VCR key. Cable Box or DVD Player—Press the AUX key. Television—Press the TV key.

Note: Be sure to hold down the mode key while entering a code number, see page 9.

➁Input Key—Press to select the program source: TV signal or signal from the DVD Player or other equipment you have connected to the A/V jacks.

➂Number Keys—Two keys must be pressed to select a channel. Example: Press 0 then 6 to select channel 6. For cable channels 100 through 125, press and hold the 1 key until C1–– appears. Then press the other two numbers.

➃Caption Key—See page 13.

➄Menu Key—Use this key with the ▲/▼and – /+keys to navigate and adjust features of the on-screen menu system (see pages 12 ~ 13).

➅Channel Scanning (CH ▲/▼) and Volume (VOL – /+) Keys—Press to scan through the channels in memory and to adjust the volume.

➆Mute Key—Press once to minimize the volume. Press again to restore.

➇VCR/DVD Keys—These keys control VCR or DVD functions for Fast Forward

( ✉✌ Rewind (

), Play (4), Record (REC •), Stop (■), and Pause (II).

▲ ▲

▲ ▲

 

➈V-GuideKey—See pages 14 ~ 15.

8 Remote Control