Sanyo DS35510 Key, VCR, DVD, AUX, Rec, Key, Key, Key, Key, Mode, Keys, Key—, Keys, Key—, Keys, Mute, will, Play, Power, Reset, Sleep, Enter, Light, —Press, Number, Volume

Power Key—Press to turn TV on or off.

MULTIMEDIA REMOTE CONTROL KEYS

Point towards TV		➠
➀	VCR TV		DVD
		AUX
➁			➉
➂			11
➃			12
➄			13
➅			14
➆
➇			15

➈

RACKING

16

➀Mode Keys—Use these keys to program the remote control and to select the operating mode (VCR, TV, DVD, or AUX ).

➁Input / TV•VCR Key—In the TV, DVD, Cable, and Satellite modes, this key selects the program source to display on the screen (TV signal or signal from equip- ment connected to the A / V jacks). In the VCR mode, this key functions as a VCR’s TV/VCR key.

➂Number Keys—Two keys must be pressed to select a channel. Example: Press 0 then 6 to select channel 6. For cable channels 100 through 125, press and hold the 1 key until C1–– appears. Then press the other two numbers.

➃Caption Key—(See page 16.)

➄V-Guide Key —(See pages 14 and 15.)

➅Menu / Guide Key—Use this key with the / and / keys to navigate and adjust features of the on-screen menu system (see pages 10 ~ 12). Use it to display the Satellite Guide in the Satellite mode.

➆Channel (CH) Scanning (/) and

Volume ( / ) Keys—Press to scan through the channels in memory and to adjust the volume.

➇Mute Key—Press once to turn off the volume. Press again to restore.

Note: When using the audio out jacks this key will not mute the sound in the fixed mode, but will mute the sound in the variable mode.

➈VCR/DVD Keys—These keys control DVD and/orVCR functions for Fast Forward ( ▲ ▲), Rewind (▲ ▲ ),

Play ( ▲ ), Record (Rec), Stop ( ■ ), Tracking (– / +),

and Pause functions.

➉Reset Key—Press this key twice to restore factory settings. The TV will automatically start Channel Search and clear all customized settings. (See page 17.)

11

12Sleep Key—Use this key with the “0” key to set the Sleep Timer (see page 17).13Enter Key—Satellite operation only.

14 Recall Key—Select a channel then select another channel using the number keys. Press Recall to switch between the channels.

15 Display Key—Press once to display the channel number and time. Press twice to display the channel number continuously. Press again to remove the display.

16 Light Key—Press to backlight the keypad. Keys will remain lit for a few seconds after releasing the key.

6