Sanyo dsr-3706pa MODE : USE, 1.INITIAL SET, 1.INITIAL SET, 35 How to set, <EXT. CLOCK SET, BCamera detection, ASummer time setting, A-1 External clock setting

Initial settings

ASummer time setting

Automatic switching from standard time to summer time can be set.

1Display the <LANGUAGE/LANGUE/SPRACHE/ IDIOMA> screen as explained in "Displaying the initial settings screen" (P34).

MENU	<MAIN MENU>
	1.INITIAL SET

<INITIAL SET> 1.LANGUAGE/CLOCK SET

(J)(S)

<LANGUAGE/LANGUE/SPRACHE/IDIOMA> ENGLISH

<CLOCK SET> 01-01-2006 SUN 00:00:00

<SUMMER TIME SET>
MODE	:	USE
	WEEK	MONTH	TIME
ON	LST-SUN	03	02:00
OFF	LST-SUN	10	02:00
	<EXT.CLOCK SET>
ADJUST.TIME		01:00

A-1External clock setting

Connect the CLOCK OUT terminal of the CONTROL terminal block on the rear panel of the DVR to the CLOCK IN terminal of the second DVR (P34: Figure 1), and move the cursor to <EXT. CLOCK SET>.

1Turn the S-dial clockwise until "01" starts blinking.

<EXT. CLOCK SET>

ADJUST.TIME 01:00 05:00

(S)

2Turn the J-dial to select the ADJUST TIME (example: 05), and then turn the S-dial clockwise.

The minutes cannot be set.

(J)(S)

3Press the EXIT/OSD button.

EXIT/OSD This completes the setting of the first DVR.

English

2Turn the J-dial, select the MODE under <SUMMER TIME SET>, and turn the S-dial clockwise.

The "USE" starts blinking.

MODE : USE

3Turn the J-dial clockwise , select USE and then turn the S-dial clockwise.

Selections:

USE: Automatic switching to summer time

NO USE: No automatic switching to summer time The cursor moves to the "ON" field. Set the start and end time of summer time.

WEEK MONTH TIME

ON LST-SUN 03 02:00

OFF LST-SUN 10 02:00

1Turn the S-dial clockwise.

Move the cursor to the "LST" field under "WEEK".

2Select the week by turning the J-dial, and turn the S-dial clockwise.

Repeat the same procedure for setting the MONTH and the TIME fields. The cursor moves to the "OFF" field.

Selections:

WEEK: LST, 1ST, 2ND, 3RD, 4TH-SUN, MON, TUE, WED, THU, FRI, SAT

3Turn the S-dial clockwise to move the cursor to the "LST" field under "WEEK".

4Select the week by turning the J-dial, and turn the S-dial clockwise.

Repeat the same procedure for setting the MONTH and the TIME fields.

4Display the same menu on the second DVR, set the same hour, and press the EXIT/OSD button.

When the first DVR reaches the set time (5:00), both DVRs will be set to 5:00.

However, the time on the second DVR and other DVRs onward can be adjusted between 4:30 and 5:29.

BCamera detection

1Display the <WARNING> screen as explained in "Displaying the initial settings screen". (P34)

The <WARNING> screen is displayed, and "NO" is blinking.

MENU	<MAIN MENU>
	1.INITIAL SET
	<INITIAL SET>
	2.CAMERA DETECT
(J)	(S)
	<WARNING>
	CAMERA DETECT

CONTINUE?

NO

2Turn the J-dial, select "YES", and turn the S-dial clockwise.

After detecting the connected cameras, the display returns to the <INITIAL SET> screen. Press the EXIT/ OSD button.

EXIT/OSD

35 How to set