Recording settings

G-4Motion sensor screen description

Use this screen for motion sensor setting on a live video

screen to detect moving objects such as intruders, and1 generate alarms.

The motion sensor detects movement based on

intensity-changes on the screen. It is necessary to use2 sensor settings that are appropriate for both the location

of the sensor and for the observed objects.

3

CH01 T-1 LEVEL : OFF MODE : A

1Cursor

The default location of the cursor is the upper left corner. Use the J-dial to move it horizontally.

2Sensor setting range

The motion sensor can be set within this area.

3Motion sensor

The type of sensor can be selected according to the detection location. Use the J-dial to change the type of the sensor.

–:Sensor turned off

A:Sensor A is used for detection

B:Sensor B is used for detection

4Camera number display (CH01)

Selects the camera number for the motion sensor.

Use the camera selection buttons to change the camera number.

Selections: CH01/CH02/CH03/CH04/CH05/CH06

5Time period (T-1)

This DVR has two timers (A and B) for setting time periods in two blocks, and separate sensors can be set up for each period.

Refer to the section about setting the time periods. (P37) Selections: T-1/T-2/T-3/T-4

<TIME PERIOD SET>

 

 

TIME PERIOD

T-1

T-2

T-3

T-4

TIME PERIOD A

00:00

00:00

00:00

00:00

TIME PERIOD B

00:00

00:00

00:00

00:00

SELECT TIME PERIOD

 

 

 

SEQUENCE

 

TIME PERIOD A

 

MASK

 

TIME PERIOD A

 

MOTION SENSOR

TIME PERIOD A

 

6LEVEL

Sets the sensitivity of the motion sensor.

OFF: Sensitivity is not set.

1 (High sensitivity) ~ 10:

Selects the sensitivity as a numeric value.

4 5

6

7

☞Motion sensor sensitivity check

When the sensor detects movement, the green () symbol changes to red, and a buzzer (beeper) goes off.

If the sensitivity is set high, a slight change in the lighting may trigger the sensor. Set the sensitivity appropriate for the setting location.

☞Stopping the motion sensor recording

Display the <ALARM REC MODE SET> screen while recording is in progress, and turn the S-dial clockwise. The motion sensor screen appears. Press the camera selection button of the current camera, and set LEVEL "OFF".

7MODE

Sets the detection method of the motion sensor.

Selections:

A:Detects moving objects at the location.

B:Detects moving objects at the location.

A AND B:

Detects simultaneous movement of objects at location A and B.

A AND NB:

Setting the moving objects detection to A and the non-moving objects detection to B will ensure that only A detects moving objects so that the detectors do not respond to such changes as light changes detected simultaneously.

A TO B:

Detects objects moving from location A to location B (time from A to B is within 2 seconds).

B TO A:

Detects objects moving from location B to location A (time from B to A is within 2 seconds).

C:Detects when the intensity on the entire screen becomes even (for example vandals spray-painting the camera). There is no need to set a location for the sensor.

English

How to set 58