Manuals / Brands / TV and Video / DVR / Sanyo / TV and Video / DVR

Sanyo dsr-3706pa English, 61 How to set, bAlarm cancellation, H-2 Alarm display settings, H-1 Alarm operation settings

1 88

Download 88 pages, 1.86 Mb

Recording settings

English

H-1Alarm operation settings

1Display the <ALARM OPERATION SET> screen as explained in "Displaying the recording settings screen", and then turn the S-dial clockwise. (P39)

The "OFF" indicator of ALARM RETRIGGER starts blinking.

MENU	<MAIN MENU>
	2.RECORD SET

<RECORD SET> 8.ALARM OPERATION SET

(J)(S)

<ALARM OPERATION SET>

ALARM RETRIGGER	: ON
MAIN MON. DISPLAY	: FULL
ALARM PRIORITY	: LAST
MON.2 DISPLAY	: NC

2Turn the J-dial, select "ON" for ALARM RETRIGGER, and turn the S-dial clockwise.

The cursor moves to "MAIN MON. DISPLAY".

3Press the EXIT/OSD button when the settings are complete.

Operation returns to the normal screen.

EXIT/OSD

bAlarm cancellation

•Forced cancellation of an alarm operation in progress Press the camera selection button of the channel with the alarm for about 3 seconds.

•Cancellation by a switch when alarm is detected Install a switch between the ALARM RESET and the C (ground) terminal of the terminal block on the rear panel, and turn on the switch when an alarm is detected.

ALARM RESET

C

H-2Alarm display settings

1Turn the J-dial, select "MAIN MON. DISPLAY", and turn the S-dial clockwise.

The "FULL" indicator of MAIN MON. DISPLAY starts blinking.

			<ALARM OPERATION SET>
			ALARM RETRIGGER	: OFF
	(J)	(S)	MAIN MON. DISPLAY	: FULL
	(J)	(S)	ALARM PRIORITY	: LAST
			ALARM PRIORITY	: LAST
			MON.2 DISPLAY	: NC

2Turn the J-dial to select FULL (example), and then turn the S-dial twice clockwise.

Selections: FULL/6/NC

The "LAST" indicator of ALARM PRIORITY starts blinking.

3Turn the J-dial to select "FIRST", and then turn the S-dial twice clockwise.

Selections: LAST/FIRST/SWITCH

The "NC" indicator of MON.2 DISPLAY starts blinking.

4Turn the J-dial, select "LAST", and then turn the S-dial clockwise.

The cursor moves back to the ALARM RETRIGGER field.

Selections: NC/SWITCH/LAST/FIRST

5Press the EXIT/OSD button when the settings are complete.

Operation returns to the normal screen.

EXIT/OSD

61 How to set

Contents

About this manual Table of Contents Foreword Safety precautions Caution bDelivery and portability bDo not expose to extreme temperatures or temperature variations bPoints on unit positioning b Maintenance when the unit is going to remain bHard disk 5 Foreword bBack up battery bMaintaining this unit bIf unused for a lengthy period of time bCopyright information bPre-confirmimportant recording assignments Main Features Accessories Names and functions of parts (front panel) 9 Foreword Names and functions of parts (rear panel) Alarm and RS-485connections Network connection terminals (LAN) 11 Foreword Control terminals (CONTROL) Preparing for use Operation display 01-01-0600:00:00 REC REPEAT EN A ALARM How to use Viewing live video using various multi screens Automatic screen scrolling AAutomatic full-screenscrolling BAutomatic quad-screenscrolling Recording video to the hard disk Viewing recorded video Changing the playback speed AFast-forward/Slowplayback Viewing still images Frame advance (forward and reverse) BFast-reverse/Slow-reverseplayback Enlarged viewing Quad-screenviewing Multi-screenviewing Searching for recorded video AAlarm search BAlarm thumbnail search ALARM THUMBNAIL SEARCH bViewing pre-alarmvideo CDate/time search bViewing the preview screen 23 How to use DArchive area search EMotion detection search EMotion detection search (continued) CHANNEL : START : 28-10-0620:30 END : bMotion sensor settings verification using the preview screen bFull-screenviewing of video detected by the motion sensor Copying recorded video to media HOW MANY : 10 SECONDS COPY TO : ARCHIVE AREA HOW MANY: 10 PICTURES Copying video (example: 10 seconds) from the internal hard disk to the COPY TO : CD-R/RW 29 How to use 10 PICTURES COPY TO : COMPACT FLASH HOW MANY : 1 PICTURES DPrinting images directly from the CompactFlash card or the Microdrive COPY TO : CF->PRINT 31 How to use Viewing Images copied to a CompactFlash card and CD-R/RWon a PC Main menu configuration Initial settings ASummer time setting A-1 External clock setting <EXT. CLOCK SET MODE : USE BCamera detection CTitle setting CAMERA NO.03 CAMERA NO.03 A-------03 CAMERA NO.03 ATM-1F DHoliday setting ETime period setting <INITIAL SET TIME PERIOD B 00:00 00:00 00:00 00:00 TIME PERIOD B 07:30 10:30 14:30 19:30 37 How to set ETime period setting (continued) b Changing the time period of operations SEQUENCE MASK bSetting the times for the time periods Recording settings AEasy recording menu description A-1 RECORDING DURATION BASE TIMER RECORDING(DLY): OFF START --:--STOP --: START 09:30 STOP 18:30 41 How to set A-2 REC RATE BASE BRecording area menu description bVerifying the capacity of the recording areas 43 How to set B-1 Changing the normal recording area and the alarm recording area : 19% B-2 Archive area full reset <MAIN MENU 2.RECORD SET 45 How to set CRecording conditions menu description bRemaining hard disk capacity warning 26-10-0602:20:20 REC REPEAT 5% C-1 Overwriteareas setting for the recording C-2 Setting series recording 47 How to set C-2 Setting series recording (continued) C-3 Series recording SERIES RECORDING : ON Setting the storage period for videos C-4 recorded in the recording areas DNormal recording area menu description D-1 Normal recording area settings 49 How to set EProgrammeddescription recording menu E-1 Programmed recording settings 5.PROGRAM REC SET 01:0.5 01:6.25 02: 12.5 03: 0.5 04: FTimer setting menu description b Timer-controlledrecording bIf the timer settings are overlapping bIf the Day of the week and Daily settings are overlapping bCancelling timer-controlledoperations F-1 DLY 08:30 18:30 OFF bSetting a program for timer-controlledrecording DLY 08:30 18:30 P-1**** FPS ON F-2 Overlapping timer-controlledrecording 10:30 20:30 TUE **:** 20:30 P-1**** FPS ON 53 How to set F-3 External timer-controlled(alarm) recording EXT ***** ***** P-1**** FPS ON EXT ***** ***** OFF 5 FPS ON GAlarm recording settings menu description 55 How to set G-1 Alarm recording settings => (01387 ALARMS CAN BE RECORDED) REC RATE: A 12.5FPS, DURATION: 20SEC => (01431 ALARMS CAN BE RECORDED) G-2 Pre-alarmrecording settings : OFF REC RATE: A 12.5FPS, DURATION: 1MIN REC RATE: A 8.333FPS, DURATION: 20SEC => (00694 ALARMS CAN BE RECORDED) G-4 Motion sensor screen description G-5 Motion sensor setting CH01 A B 59 How to set HAlarm operation settings menu description H-1 Alarm operation settings bAlarm cancellation H-2 Alarm display settings 61 How to set General settings AData display settings/VIDEO LOSS settings 1.DISPLAY SET 63 How to set B Buzzer settings 2.BUZZER SET CSecurity lock menu description Turn ON the ADMIN and USER C-1 security locks and set passwords for the DVR ADMIN 12345AB- ON USER AB12345- ON C-2 Activating the security lock C-3 Cancelling the security lock b List of permitted operations after setting the passwords 67 How to set Hard disk settings menu description Hard disk initialization bHard disk expansion 4.HDD SET ENetwork settings NETWORK CONTROL : ON(NETWORK) NETWORK STATUS : ON E-1 Network password modification ID1 : FRS-485settings 6.RS-485SET STATUS INFO : OFF Screen settings AChanging the multi-screenposition Automatic scrolling of live video of the B-1 main monitor and the monitor 2 at Turning off display of specified B-3 cameras during timer-controlled periods TIME PERIOD : T-1 (06:00-11:30) CMasking specific camera images MASK SET 75 How to set DAdjusting color tones of the live video Power loss information/Used time Initialization log Menu copy A-2 Load menu content saved to the CF card onto other DVRs of the same model COPY RECORDING AREA SETTINGS: NO SAVE MENUS TO CF B)When "YES" is selected for COPY RECORDING AREA SETTINGS (Initialized) A)When "NO" is selected for COPY RECORDING AREA SETTINGS Interface (RS-485)specifications Specifications List of recording rate and recording times bWhen recording using an 500GB hard disk (when 99% of the area is utilized) bRecording rate setting bPre-alarmrecording time 85 Other Push-lockterminal specifications SANYO Electric Co., Ltd