General settings

B Buzzer settings

These settings are used to generate a warning buzzer

3 Press the EXIT/OSD button.

when the hard disk is full and at alarm events.

EXIT/OSD

 

1 Display the <BUZZER SET> screen as explained in

 

"Displaying the general settings screen", and then

 

turn the S-dial clockwise. (P62)

 

The "OFF" field in the ALARM line starts blinking.

MENU

<MAIN MENU>

 

 

3.GENERAL SET

 

 

<GENERAL SET>

 

2.BUZZER SET

 

(J)

(S)

 

 

<BUZZER SET>

 

 

ALARM

: OFF

 

DISK FULL

: ON

 

DISK ERROR

: ON

 

LOCK WARNING

: ON

 

KEY IN

: OFF

 

NON REC

: OFF

☞Press any operating button to stop the buzzer.

The buzzer can also be stopped by turning the S-dial or the J-dial.

2Turn the J-dial to select ON or OFF, and then turn the S-dial clockwise.

Repeat the same procedure for selecting the desired settings for each item.

•ALARM

OFF: Buzzer will not sound, even if an alarm is detected.

ON: Buzzer will sound when an alarm is detected.

•DISK FULL

OFF: The buzzer will not sound, even if the hard disk is full, and overwrite is disabled.

ON: The buzzer will sound if the hard disk is full, and overwrite is disabled.

•DISK ERROR

OFF: The buzzer will not sound, even if a hard disk error occurred.

ON: The buzzer will sound if a hard disk error occurred.

•LOCK WARNING

OFF: The buzzer will not sound, even if the button locked by the security lock is pressed.

ON: The buzzer will sound twice with a 0.5 sec cycle if the button locked by the security lock is pressed.

•KEY IN

OFF: The buzzer will not sound, even if the button necessary for operation is pressed.

ON: The buzzer will sound, when the button necessary for operation is pressed.

•NON REC

OFF: The buzzer will not sound, even if recording was stopped.

ON: The buzzer will sound if the recording was stopped.

English

How to set 64