3DVR Viewer2 Operation Guide
Functions of the Viewer Operating Panel
The audio and image functions of the Viewer screen can be operated.
(Viewer Operating Panel)
1
2 | 3 | 4 | 5 | 6 | 7 |
1Playback slide bar
The time stamp (recording date and time) of the start and stop point of the playback file are displayed at both ends of the slide bar.
Sliding the slide bar knob allows you to move the playback point.
zClicking the knob or sliding the knob while clicking it displays the number of the image of the video being displayed, on the cursor.
zClicking a position that differs from the current playback point using the slide bar will move the playback point by one percent of the total number of images.
2Operating buttons
Buttons that can be selected are black, buttons that are currently in function are green.
: Rewinds to the previous image when the image is on pause.
: Pauses the playback.
: Forwards to the next image when the image is on pause.
: If the slide bar knob is positioned to the right of the start point, the video can be played in reverse.
: If the slide bar knob is positioned to the left of the stop point, the video can be played in sequence.
3Playback speed adjusting section (Initial setting: 3)
Allows you to adjust the playback speed to 10 levels by sliding the slide bar knob.
zSet the playback speed while playback is stopped.
zWhen playing back audio, audio is played back at the rate at which it was recorded regardless of the [Playback Speed] set.
4Audio adjusting section
Allows you to turn on/off and adjust the volume of the audio playback when a playback file contains audio data.
3
12
1 Clicking the button turns the audio playback on and off.
2Sliding the knob allows you to adjust the audio volume to 10 levels.
3You can select the channel for audio playback (1ch/ 2ch).
zBe sure to stop playback before you turn on/off audio playback or switch the playback channel.
zAudio playback is only available when you are in the full screen layout.
5Channel display
The number of the playback channel of the images being displayed is shown on full screen and quad screen.
6Time and date display
The time stamp (recording date and time) of the images being viewed is displayed.
7Image number display
The number of the “current image and the total number of images” is displayed.
English | 15 |