2Additions and Changes to Network Operations

Newly Added Alarm Notification Menus (P201)

The following menu items have been added to the “ALARM NOTICE SET” screen under “ADVANCED MENU SET”.

These menu items are not available on the DVR side.

A

B

1(added)

2(added)

4(added)

3(added)

1Support for SSL communications

Now you can send alarm notifications via SSL communications.

[Settings] (‹ indicates default setting)

Setting

Description

‹OFF

Disables SSL support.

 

 

ON

Enables SSL support.

 

 

2Specifying the SMTP port number

Enter a port number you want to use for SMTP (send) within the range of 0 to 65535. (Default: 25)

3Specifying the POP3 port number

Enter a port number you want to use for POP3 (receive) within the range of 0 to 65535. (Default: 110)

4Sending warning notifications

You can configure the main unit to send warning notification mail messages when the following problems are detected in the functionality and operation of the main unit.

You can configure the warning notification feature the same way as the alarm notification feature. All settings default to “OFF”; turning “ON” an item causes the main unit to send warning mail when the corresponding condition is detected.

zHDD:

The hard disk is faulty.

zV. LOSS:

The video signal is disconnected.

zFAN:

The fan is faulty.

zNON REC:

The DVR has stopped recording.

zFULL:

Any one of the recording areas on the hard disk has reached the “remaining-space” warning level or has become full.

zPOWER:

The power has turned off and back on again.

zWhen you want to use the warning notification feature, choose “ON” in the “ALARM NOTICE” column A.

zThe “USE” column B controls the settings for alarm notification, and does not affect the warning notification feature. Regardless of the settings in the “USE” column, notifications with “ON” settings are in effect.

10

English