1Additions and Changes to Main Unit Operating Procedures
Forcible Interruption of Recording (P58)
Now you can forcibly interrupt the current recording session while the <MAIN MENU> screen is displayed. Using this feature, you can change the menu settings without changing the current recording conditions.
zTo interrupt the current recording session:
Press and hold the [SHUTTLE HOLD] button for about 3 seconds.
☞The recording indicator turns off, and all the recording mechanisms (normal, timer, and alarm) are switched to pause mode. During pause, you can change the menu settings.
While the recording session is paused,
a
|
|
|
|
<MAIN MENU> |
| ||
|
| 1.INITIAL SET | |
|
| 2.RECORD SET | |
|
| 3.GENERAL SET | |
|
| 4.SCREEN SET | |
|
| 5.POWER LOSS/USED TIME | |
|
| 6.INITIALIZATION LOG | |
|
| 7.COPY MENU SETTINGS | |
|
| 8.ADVANCED MENU SET | |
|
| MOVE:JOG SELECT:SHUTTLE |
|
zTo exit from pause mode:
Press the [EXIT/OSD] button.
☞You are returned to the same recording status as before you paused the recording session.
Changes to the Display of Monitor 2 upon Alarm Detection (P104)
The following changes have been added to the “MON.2 DISPLAY” item on the <ALARM OPERATION SET> screen under “RECORD SET”.
<ALARM OPERATION SET> |
|
| |
ALARM RETRIGGER | : ON |
|
|
MAIN MON. DISPLAY | : FULL |
|
|
ALARM PRIORITY | : LAST |
| (Settings changed) |
MON.2 DISPLAY | : NC |
| |
| |||
[Settings] ( indicates default setting)
Setting | Description | |
NC | When an alarm is detected, the main monitor | |
does not change. | ||
| ||
|
| |
| When a number of alarms occur, the display | |
SWITCH | switches between the video from the | |
(added) | corresponding cameras, showing each for one | |
| second. | |
9 | When an alarm is detected, the main monitor | |
appears in multi 9 screen display. | ||
| ||
|
| |
16 | When an alarm is detected, the main monitor | |
appears in multi 16 screen display. | ||
| ||
|
| |
LAST | When a number of alarms occur, the most recent | |
(added) | alarm video is given priority and is displayed. | |
| When a number of alarms occur, only the video | |
FIRST | for the first alarm is displayed. However, if the | |
(added) | duration for the first alarm expires, video for the | |
| next alarm is displayed. | |
|
|
zWhile recording is paused, the DVR does not accept any new recording command.
zIf, with the recording session paused, you have uploaded a menu setting file or a power failure has occurred, the DVR does not resume the previous recording status.
English | 5 |