Sharp UP-600, UP-700 instruction manual Error messages

(2) Error messages

When an error occurs, a corresponding error message is displayed.

For a description of the error messages, see the “List of error messages” below.

List of error messages

Error message (Default)		Description
BUSY	•	The target machine is busy.
LACKING MEMORY	•	The GLU code or related memory file is not enough.
NO AUTHORITY	•	The server who entered a GLU/PBLU code was not authorized.
UNDEFINED CODE	•	The specified server code is not present in the master.
	•	The entered GLU/PBLU code is not listed.
CODE NOT FREE	•	The specified server has signed on at another machine.
	•	The entered GLU/PBLU code is in use.
POWER OFF	•	The power was not turned on.
T-LOG FULL	•	The T-LOG file is full.
NON RESET	•	IRC initial D/L before resetting.
TYPE ERROR	•	IRC Download file type mismatch.
SYSTEM CLOSED	•	Entry is executed in close store state.
IS SIGNED ON	•	IRC server sign-on error (when all server resetting executed).
NO REPLY/MASTER	•	Master does not reply to the request.
NO REPLY/BACKUP	•	Backup master does not reply to the request.
ATTEMPT RETRY?	•	System retry message.

NOTE

•To clear the error message displayed, press the [CL] key.

•Please consult your authorized SHARP dealer to remedy the cause for the error condition.

5