Sharp UP-600, UP-700 instruction manual

4.Individual reports — master/back-up master/satellite

(1)Report generation procedure

To generate respective reports, use the following procedure, referring to the list of individual reports on the following pages.

1. Turn the mode switch to the required position (OPXZ, X1/Z1 or X2/Z2).

2. Select “READING” or “RESETTING” depending on your need, and press the [ENTER] key.

3. Select the type of report you wish to generate and press the [ENTER] key or enter the corresponding report type No. (2-digit) shown on the display. (If the desired type of report is not listed on the display, scroll up or down the screen.)

4. If you need to enter data to generate the report, follow the instructions given on the display for entry.

23