Sharp UP-700, UP-600 Creating/updating the master list — master, 1Creating the master list

Turn the mode switch to the PGM2 position.

3.Creating/updating the master list — master

(1)Creating the master list

This may only be performed on the pre-designated master.

1.

2. Select “INLINE SETTING” and press the [ENTER] key.

The INLINE SETTING menu will open.

3. Enter a terminal number for IP ADDRESS 4 from (0 -

254) for the master and then carry out the programming for other INLINE SETTING items and press the [ENTER] key. The window for the creation of the master list will open.

4.Enter the terminal number (1 - 254) for the master in the IRC system and press the [ENTER] key. The machine number line will appear.

5. Enter the machine number (1 - 999999) that corresponds to the master’s entered terminal number and press the [ENTER] key.

6. Repeat steps 4 to 5 for all satellites in the IRC system. Press the [CA/AT] key to complete the master list.

(When the back-up master is enabled, the “BMA MACHINE” line will appear to enter the machine number (see page 31). To return to the PGM2 mode menu, press the [CANCEL] key.

28