System Setup
Menu Operation
1.Press [SETUP] on the remote control to show the setup menu.
2.Press [
]/[
] to select an item. The submenu of the selected item will be displayed below instantly.
3. Press [ 
]/[ 
] to select an item you desire to set in the submenu, then press [ENTER] /
[
]to enter. Use [ 
]/[ 
] to select an option, then press [ENTER] to confirm it, or press [
] to cancel.
4.Then you can press [ 
]/[ 
] to continue to set other items in the submenu.
5.Press [
] to go back to the superior menu of the current one.
6. Press [SETUP] again to exit the setup menu. Alternately, move the high light to | , |
then press [ENTER] to exit the setup menu. |
|
1 GENERAL SETUP PAGE
1.1 TV DISPLAY
If the unit is connected to a conventional TV set, you are supposed to select 4:3 PANSCAN or 4:3 LETTERBOX. The 4:3 image will be displayed in full screen in its native aspect ratio. 4:3 PANSCAN: The
4:3 LETTERBOX: The
16:9: If the unit is connected to a
1.2 ANGLE MARK
Set this item to ON. When a disc encoded with multiple camera angles is playing, the angle mark will display on the screen. Then you can view the video of different camera angles by pressing [ANGLE] on the remote control.
Set this item to OFF to disable this function.
NOTE: This function only works with those discs encoded with multiple camera angles.
1.3 OSD LANGUAGE
Set the
1.4 CLOSED CAPTIONS
Set this item to ON. When a disc encoded with closed captions, the closed captions will be shown on the screen. Set this item to OFF to hide it.
You can also press [SUBTITLE] on the remote control to show or hide the closed captions. NOTE: This function only works with those discs encoded with closed captions.
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused, stopped etc, for several minutes, a screen saver will appear on the screen. You can press any key or button except [STANDBY/ON] to wake it up.
OFF: Disable the screen saver function.
