Remote control
Insert two AAA/1.5V batteries into the remote control. Point the remote control at
the remote sensor on the front panel. The remote control works within a distance of
about 7 metres from the sensor and within an angle of about 30 degrees from the
left and right side.
Note:
Remove the batteries when you do not intend to use the remote control for a long
time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Be environmentally friendly and dispose of batteries according to your
government regulations.
Remote Control Operation
Battery Installation
1Remove the battery compartment cover
on the back of the remote control.
2Load the batteries into the battery
compartment making sure that the
batteries have been inserted with the
correct polarities matching the symbols +,
- as indicated inside the battery
compartment.
3Replace the cover.

-6-